[硬件求助] 用了两年的3600+B450开始偶发whea-18错误，咨询一下大佬们解决方案

𝒁𝒚𝒌𝒊𝒏 ⋆

2021-11-22T07:14:02+00:00

上个月底开始玩大逆转裁判开始的，有时会突然直接黑屏然后自动重启
重复了几次之后清了下灰，把内存和电源线啥的重新插拔了下，之后正好大逆转裁判也打完了就不记得再出现过了
然后昨天玩雀魂又遇到这个问题了，似乎都是低负载的时候出问题

[img]https://img.nga.178.com/attachments/mon_202111/26/9aQ2p-l1w4K2gT3cSsg-jt.jpg[/img]

第一次10月29日17点44分有两个，一个是APIC ID11，一个是APIC ID0
第二次10月30日11点05分有一个，APIC ID0
第三次11月3日15点40分有一个，APIC ID5
第四次11月25日19点47分也就是这次一个，APIC ID10

配置是3600(散片)+b450m迫击炮max+科赋cjr普条2666 16g*2+盈通5700xt，电源是安钛克HCG750
两年前双十一买来的时候折腾了下超频，然后发现我这颗3600大概是超级大雷，后来就一直定压定频用了
3600 4.1ghz 1.3375v
cjr 3600mhz 16-18-19-19-36-56 1.37v
这个频率应该算比较低的了吧[s:ac:哭]

现在把bios和芯片组驱动更新到了最新，正好刷BIOS把设置全重置了，CPU保持默认的PBO auto，内存memory try it 3200 16-18，不知道会不会继续出错[s:ac:哭1]
然后试了一下CTR诊断，防掉压4级，打开两个CPPC

CTR诊断 ...

***ClockTuner for Ryzen 2.1 RC5(ver.23) by 1usmus***
AMD Ryzen 5 3600 6-Core Processor
MSI B450M MORTAR MAX (MS-7B89)
BIOS ver. 2.E3 SMU ver. 46.71.00
TABLE ver. 2361603
DRAM speed 2667 MHz
11/26/2021 14:42:41

P1
P1 PROFILE has been restored!
P2
P2 PROFILE has been restored!
PX
PX PROFILE has been restored!

Phoenix ready!
Cinebench R20 started
Cinebench R20 finished with result: 3415
Voltage: 1.406 V PPT: 79.4 W Temperature: 56.2°

14:44:33: Silicon FIT measurement started...
14:44:52: Silicon FIT measurement done!
14:44:52: Stress test stopped.

CCX COEFFICIENTS
CCX# 1 4 CPPC 116
CCX# 2 0 CPPC 127

CORES ORDER (from the best to the worst)
### CPPC FIT
1 С06 С03
2 С04 С04
3 С05 С05
4 С01 С01
5 С03 С06
6 С02 С02

AVX light mode
Cycle time: 60000 ms
Reference frequency: 4050MHz
Reference voltage: 1300 mV
Voltage step: 6 mV

Manual overclocking mode enabled
14:44:56: Saving temporary settings...
14:45:01: CCX1 (116): 4050 MHz, 1300 mV
14:45:01: CCX2 (127): 4050 MHz, 1300 mV
14:45:01: Step# 1. Diagnostic VID: 1300 mV
14:45:01: Stress test 1 started...
14:45:36: Stress test stopped.
14:45:37: Stress test 2 started...
14:45:54: Thread# 7 fall down!
14:45:54: Stress test stopped.
14:45:56: Step# 2. Diagnostic VID: 1306 mV

DIAGNOSTIC RESULTS
AMD Ryzen 5 3600 6-Core Processor
CPU VID: 1306
CPU TEL: 1265
Max temperature: 55.2°
Energy efficient: 3.2
Your CPU is BRONZE SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 3875 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1350 mV
Reference frequency: 4025 MHz
Recomended values for undervolting:
Reference voltage: 1175 mV
Reference frequency: 3725 MHz

Phoenix deactivated!

推荐方案居然是1.35v 4.025ghz，是不是究极逆天大雷了[s:ac:喷] 最高温度55.2度和能效3.2是个什么水平，正常吗？ ~~这温度总感觉是这家伙懒得动。。~~