老哥们新买的显示器泛黄但是拍不出来

有rgb可以调的话自己往蓝色那边拉一点,冷色调蓝光会比较多

左边是明基ew2780u 肉眼看到的跟拍的是反过来的而且还要黄一点 [s:ac:瞎]
[img]https://img.nga.178.com/attachments/mon_202212/16/9aQ189-htj1Z2kT3cSzk-qo.jpg.medium.jpg[/img]
[img]https://img.nga.178.com/attachments/mon_202212/16/9aQ189-dj3xK1vT3cSsg-lc.jpg.medium.jpg[/img]
[img]https://img.nga.178.com/attachments/mon_202212/16/9aQ189-2ahsXdZ3lT3cSzk-qo.jpg.medium.jpg[/img]

[quote][pid=660530322,34715979,1]Reply[/pid] Post by [uid=60956660]qtlyj[/uid] (2022-12-16 21:40):

有rgb可以调的话自己往蓝色那边拉一点,冷色调蓝光会比较多[/quote]拉了但是偏色严重 我其他2个显示器颜色都差不多就这个怎么调都不对

[url=https://www.techpowerup.com/review/gigabyte-m32u/7.html]TechPowerUp 测过[/url]，这款显示器默认色温甚至低于 D65，别的显示器都在 7000k 左右，调一下色温就好

[quote]At the factory settings, I've measured brightness of 230.96 cd/m2, with the color temperature sitting at 6,296 K.[/quote]楼主可以按他们的方法把色温调到接近 D65

[quote]Before doing any further measurements, it's best to dive into the OSD and adjust a couple of settings to get the color temperature and image brightness closer to what I'd consider ideal (6,500 K and 250 cd/m2). On my sample of the Gigabyte M32U this was achieved by adjusting the brightness to 72 (Picture > Standard > Brightness), setting the color temperature to User Define (Picture > Standard > Color Temperature > User Define), and changing the channel gain to 90 for Red, 92 for Green, and 100 for Blue. This resulted in a measured picture brightness of 250.05 cd/m2 and color temperature of 6,504 K. Measured static contrast was slightly reduced to 930:1, which was still high enough to provide a good-looking picture for everyday usage and multimedia alike.[/quote]嫌偏色的话就得上校色仪统一校色了，TechPowerUp 调整后的色差是 ΔE<3(未使用校色仪),按理说不会有太大问题

ips就是容易过饱和，通病了

Reply to [pid=660532147,34715979,1]Reply[/pid] Post by [uid=25104411]史密斯淋浴器[/uid] (2022-12-16 21:49)

面板类型与色彩饱和度无关，大部分时候只是厂家刻意预设的，LG 就很喜欢红色过饱和的预设值

Reply to [pid=660533467,34715979,1]Reply[/pid] Post by [uid=64025782]sommio[/uid] (2022-12-16 21:56)
我试图通过下载rtings上的icc校色文件和调试色温来改善色彩但始终存在颜色不准确的问题，我的相机无法记录我所看到的画面，所以我在想这是否是硬件滤蓝光的问题？所以我将同样拥有硬件滤蓝光的R9000p拿来对比，发现并不存在这个问题[s:ac:哭]

不用校色仪出来的ICC没啥用的

[quote][pid=660540611,34715979,1]Reply[/pid] Post by [uid=60359014]ATIVITA[/uid] (2022-12-16 22:34):

我试图通过下载rtings上的icc校色文件和调试色温来改善色彩但始终存在颜色不准确的问题，我的相机无法记录我所看到的画面，所以我在想这是否是硬件滤蓝光的问题？所以我将同样拥有硬件滤蓝光的R9000p拿来对比，发现并不存在这个问题[s:ac:哭][/quote]所以说ips麻烦的鸭屁，我坚决不买

Reply to [pid=660540611,34715979,1]Reply[/pid] Post by [uid=60359014]ATIVITA[/uid] (2022-12-16 22:34)

icc 文件是需要软件支持，Windows 桌面不支持 icc 捏，建议按 TechPowerUp 设置
ew2780u 预设值很接近 d65，按理说参照 TechPowerUp 设置后不会有太大差异

色温问题，6500k就是偏黄的，你要是不喜欢，可以往上加。

[quote][pid=660559067,34715979,1]Reply[/pid] Post by [uid=64025782]sommio[/uid] (2022-12-17 00:14):

icc 文件是需要软件支持，Windows 桌面不支持 icc 捏，建议按 TechPowerUp 设置
ew2780u 预设值很接近 d65，按理说参照 TechPowerUp 设置后不会有太大差异[/quote]试过了 但无法还原ew2780u的色彩表现 尤其是蓝色差异明显 但摄像机里拍到的画面色彩是正常的 我不知道是什么情况