[硬件产品讨论] 好像摸到雷了

查看相关话题
*꒰♡꒱ʚ.𝔊𝔥𝔬𝔰𝔱.ɞ*-avatar

*꒰♡꒱ʚ.𝔊𝔥𝔬𝔰𝔱.ɞ*

2021-01-27T07:36:31+00:00

用CTR测了下，结果喜闻乐见。
这个软件有点玄学啊[s:ac:哭笑]，一会儿铜牌一会儿金牌的
测试结果 ...
DIAGNOSTIC RESULTS
AMD Ryzen 9 5900X 12-Core Processor
Max temperature: 64.6°
Energy efficient: 3.67
Your CPU is BRONZE SAMPLE
Recomended CCX delta: 50
Theoretical maximum CCX delta: 75
Recomended values for overclocking (P1 profile):
Reference voltage: 1175 mV
Reference frequency: 4275 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1275 mV
Reference frequency: 4400 MHz
Recomended values for undervolting:
Reference voltage: 1000 mV
Reference frequency: 3925 MH
测试结果2 ...
***ClockTuner for Ryzen 2.0 RC3 by 1usmus***
AMD Ryzen 9 5900X 12-Core Processor
GIGABYTE X570 AORUS XTREME
BIOS ver. F33a SMU ver. 56.45.00
TABLE ver. 3672068
DRAM speed 3866 MHz
02/05/2021 18:02:18


Phoenix - hello there :)
CTR completed diagnostic in alternative mode


DIAGNOSTIC RESULTS
AMD Ryzen 9 5900X 12-Core Processor
Max temperature: 64.8°
Energy efficient: 4.08
Your CPU is GOLDEN SAMPLE
Recomended CCX delta: 50
Theoretical maximum CCX delta: 75
Recomended values for overclocking (P1 profile):
Reference voltage: 1175 mV
Reference frequency: 4500 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1275 mV
Reference frequency: 4625 MHz
Recomended values for undervolting:
Reference voltage: 1000 mV
Reference frequency: 4150 MHz

Phoenix deactivated!
附上CTR 2.0下载地址
做了个种子，原地址下载慢的，可以试试
[url=https://www.techpowerup.com/download/amd-ryzen-clock-tuner-ctr-1usmus/]官方下载地址[/url]
种子 ...
magnet:?xt=urn:btih:LJ7GHDY4Z2TEIRG4BO6YOOGVJVZLTIOM&dn=clocktuner-ryzen-2-0.zip&xl=242939793
tracker ...
udp://93.158.213.92:1337/announce

udp://138.255.103.83:1337/announce

udp://208.83.20.20:6969/announce

udp://193.218.118.220:6969/announce

udp://79.111.118.59:60889/announce

[url]http://93.157.234.32:60889/announce[/url]

udp://184.105.151.164:6969/announce

udp://51.68.199.47:6969/announce

udp://51.81.46.170:6969/announce

udp://91.216.110.52:451/announce

udp://89.234.156.205:451/announce

udp://5.206.60.196:6969/announce

udp://5.226.148.20:6969/announce

udp://37.235.174.46:2710/announce

udp://185.181.60.67:80/announce

udp://138.201.150.56:6969/announce

udp://51.15.40.114:80/announce

[url]http://168.119.237.9:6969/announce[/url]

[url]http://195.201.31.194:80/announce[/url]
dhootiest95-avatar

dhootiest95

水冷还是风冷
Plextur_1G-avatar

Plextur_1G

5900x 你首先要确定的是 你的bios 有没有问题 微码有没有升级到agesa 1.2.0 及以上 而且5900x的俩个核心 ccx1 比 ccx2 强很多 不能这么看
*꒰♡꒱ʚ.𝔊𝔥𝔬𝔰𝔱.ɞ*-avatar

*꒰♡꒱ʚ.𝔊𝔥𝔬𝔰𝔱.ɞ*

Reply to [pid=491043929,25425551,1]Reply[/pid] Post by [uid=37801589]gnr163[/uid] (2021-02-05 15:42)
*꒰♡꒱ʚ.𝔊𝔥𝔬𝔰𝔱.ɞ*-avatar

*꒰♡꒱ʚ.𝔊𝔥𝔬𝔰𝔱.ɞ*

Reply to [pid=491043929,25425551,1]Reply[/pid] Post by [uid=37801589]gnr163[/uid] (2021-02-05 15:42)
H150i pro xt，温度最高64，应该压得住
-𝑍𝑖𝑙𝑓-avatar

-𝑍𝑖𝑙𝑓

近期生产的好像都是雷，据说为了提高出货量，降低了标准
*꒰♡꒱ʚ.𝔊𝔥𝔬𝔰𝔱.ɞ*-avatar

*꒰♡꒱ʚ.𝔊𝔥𝔬𝔰𝔱.ɞ*

Reply to [pid=491043946,25425551,1]Reply[/pid] Post by [uid=40597281]云耀八分[/uid] (2021-02-05 15:42)
BIOS 是F33a，AGESA已经更新了。
不折腾了，等苏妈的降压超频吧
*꒰♡꒱ʚ.𝔊𝔥𝔬𝔰𝔱.ɞ*-avatar

*꒰♡꒱ʚ.𝔊𝔥𝔬𝔰𝔱.ɞ*

Reply to [pid=491046752,25425551,1]Reply[/pid] Post by [uid=62406615]美利坚帝国主义[/uid] (2021-02-05 15:51)
[s:ac:哭笑]我抢的首发
Plextur_1G-avatar

Plextur_1G

Reply to [pid=491047938,25425551,1]Reply[/pid] Post by [uid=39748109]糍耙[/uid] (2021-02-05 15:55) pbo 调成auto了吗
*꒰♡꒱ʚ.𝔊𝔥𝔬𝔰𝔱.ɞ*-avatar

*꒰♡꒱ʚ.𝔊𝔥𝔬𝔰𝔱.ɞ*

Reply to [pid=491049313,25425551,1]Reply[/pid] Post by [uid=40597281]云耀八分[/uid] (2021-02-05 15:59)
PBO手动拉的5x
Fycr-avatar

Fycr

一样 1.25@4.7Ghz能锁住过20圈FP64的5900X
降压超频708分
居然拿个铜牌
等CTR慢慢稳定吧
Plextur_1G-avatar

Plextur_1G

Reply to [pid=491052747,25425551,1]Reply[/pid] Post by [uid=39748109]糍耙[/uid] (2021-02-05 16:11)
PBO/PBO2 - Auto mode only.
AGESA 1.2.0.0 and newer only for Zen 3 and APU Renoir processors. For Zen 2, it does not matter.
Core voltage / CPU voltage - Auto only. Offset is also not allowed.
CPU multiplier - Auto only.
Performance Enhancer - Disabled only.
CPU Virtualization - not important.
CPPC - Enabled.
CPPC Preferred Cores - Enabled.
Global C-State - Enabled.
Power Profile - irrelevant.

按照这个调整bios再测
melatron.-avatar

melatron.

[quote][pid=491056959,25425551,1]Reply[/pid] Post by [uid=40597281]云耀八分[/uid] (2021-02-05 16:24):

PBO/PBO2 - Auto mode only.
AGESA 1.2.0.0 and newer only for Zen 3 and APU Renoir processors. For Zen 2, it does not matter.
Core voltage / CPU voltage - Auto only. Offset is also not allowed.
CPU multiplier - Auto only.
Performance Enhancer - Disable[/quote]然而微星b550i还是1.1.9beta[s:ac:喷]
tanner-avatar

tanner

怎样看雷不雷
melatron.-avatar

melatron.

[quote][pid=491072651,25425551,1]Reply[/pid] Post by [uid=37214667]神秘韵律[/uid] (2021-02-05 17:13):

怎样看雷不雷[/quote]#sample golden>silver>bronze
HoniiBadgerr-avatar

HoniiBadgerr

这个测试是有点问题的，我一个4.7g死活上不去的，只能1.33 锁4.65的天雷5900x，反而能拿银牌[s:ac:怕]
Fycr-avatar

Fycr

[quote][pid=491076208,25425551,1]Reply[/pid] Post by [uid=60222159]aaron2313[/uid] (2021-02-05 17:25):

这个测试是有点问题的，我一个4.7g死活上不去的，只能1.33 锁4.65的天雷5900x，反而能拿银牌[s:ac:怕][/quote]试试降压
加压不一定能稳 但是降压可以 AMD传统艺能
我的之前1.32V@4.725Ghz跑FP64都黑
但是1.25V@4.7Ghz连过20遍FP64
当然还不如默认用[s:ac:喷]CPU-Z也就670分左右单核
默认用CPUZ能上687分
玩游戏的时间监控了下 CCD0两个核心轻轻松松4.925Ghz
HoniiBadgerr-avatar

HoniiBadgerr

Reply to [pid=491091533,25425551,1]Reply[/pid] Post by [uid=60149744]咖喱可可豆[/uid] (2021-02-05 18:18)
1.22-1.40之间都试过了，开机，CPU-Z跑分都没问题，但一跑FP64就秒黑，最高纪录是两遍[s:ac:怕]
[img]https://img.nga.178.com/attachments/mon_202102/05/9aQ16p-57ikZeT1kSf6-go.png[/img]
mareslzy-avatar

mareslzy

雷不雷其实开pbo几乎没什么差距的。
pbo体质看的是金银核心，全核超频才看最烂的那颗核心。
tanner-avatar

tanner

下载太慢怎么办

相关话题

[硬件产品讨论] 好像板卡厂已经在着手让IU支持A卡的SAM了啊 [硬件产品讨论] 好像锁算力的3060被秒破但是成本变高了··· [硬件产品讨论] 好像论坛推荐的elecom也不对吧？ [硬件产品讨论] 好像3080 12G没什么讨论和用户？ [硬件产品讨论] 海康好像又搞了个新版E2000Lite [硬件产品讨论] 七彩虹好像显卡热管数给标错了啊 [硬件产品讨论]最近好像60系A卡最近突然猛降了一波 [硬件产品讨论]七彩虹好像出了一些问题。 [硬件产品讨论] 现在实体店好像没那么坑了啊？
返回主页