[作业贴] 作业写到一半就有点索然无味了，12400装机分享

配置单：
处理器：路边摊 12400散片 ￥1329
主板：阿硕 B660m-k ￥650
内存：英萎达 8G*2 3200 ￥398
散热：害民 AX 120R SE ￥69
固态：东数 SN750(旧)
电源：贴牌至尊 GX450 ￥299
机箱：后马造趣 ￥245
总计：￥2990

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQmr01-j6lrZbT3cSld-sg.jpg.thumb.jpg[/img]

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQmr01-430gZqT3cSsg-lc.jpg.thumb.jpg[/img]

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQn3ls-6d3gK2rT3cSsg-lc.jpg.thumb.jpg[/img]

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQpy85-hyw0ZrT3cSsg-lc.jpg.thumb.jpg[/img]

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQpy75-eyshZqT3cSsg-lc.jpg.thumb.jpg[/img]

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQvme1-fnn1K2lT3cSsg-lc.jpg.thumb.jpg[/img]

装机过程

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQmr07-8x2eZiT3cSlc-sg.jpg.thumb.jpg[/img]

SFX电源架螺丝，拧上去简单，卸下来费好大劲，有瑕疵

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQpzwg-f52jK25T3cSsg-lc.jpg.thumb.jpg[/img]

内存槽离的太近了，被迫把风扇上移，有点担心侧板盖不上

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQq04k-34d1ZdT3cSsg-lc.jpg.thumb.jpg[/img]

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQmr04-1pulZbT3cSsg-lc.jpg.thumb.jpg[/img]

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQvmfk-bhv7K2bT3cSsg-lc.jpg.thumb.jpg[/img]

装好后的顶部视角，突出来好多，再往下就压到内存了，侧板盖上后只留有两张银行卡的厚度的空间~safe~

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQpzza-46ejK2kT3cSsg-lc.jpg.thumb.jpg[/img]

m2固态安装，阿硕很抠没有预留金属螺柱，用的是塑料快拆，emmm...总给人不太放心的感觉

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQmr04-j1vkZbT3cSsg-lc.jpg.thumb.jpg[/img]

对比一下五年前3500块的神船笔记本，阿硕真是扣到家了

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQq002-rqaZhT3cSsg-lc.jpg.thumb.jpg[/img]

全部装好了，最好的理线就是不理，侧板一盖，架子下面一塞，清净。

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQq07p-3vqlK2oT3cSsg-in.jpg.thumb.jpg[/img]

开机一次点亮，送的风扇光线太刺眼了，后面直接把灯光线剪了，机箱面板的指示灯跳线都没接，光污染——NO

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQvmfs-bgpgK20T3cSsg-g0.jpg.thumb.jpg[/img]

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQmr04-l402K2gT3cSsg-lc.jpg.thumb.jpg[/img]

win11安装遇到问题了，固态拆下装回笔记本改格式

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQvmfd-ivq7K1uT3cSsg-lc.jpg.thumb.jpg[/img]

浪费了不少时间终于装好了，win11用起来感觉比10流畅很多，运行起来比笔记本还安静，室温15度，12400待机25度风扇600转，满载52度风扇900转，12代功耗真香

[img]https://img.nga.178.com/attachments/mon_202202/23/9aQpzyp-237xZbT3cSsg-lc.jpg.thumb.jpg[/img]

以上就是本次装机过程的全部啦，空气显卡继续等吧
最后给一些购买建议
散片买完第三天降了60块回到日常价格1269，现在可以放心购买
华硕B660m-k这款主板内存槽离塔扇太近，打算买的要考虑好内存高度和机箱散热限高