にじくん
2024-10-25T14:07:18+00:00
[img]https://img.nga.178.com/attachments/mon_202410/26/9aQ19t-ezroK29T3cSsg-m0.jpg[/img]
[img]https://img.nga.178.com/attachments/mon_202410/26/9aQ19t-dx54K1yT3cSsg-m0.jpg[/img]
[img]https://img.nga.178.com/attachments/mon_202410/26/9aQ19t-1z9zZeT3cSzf-u7.jpg[/img]
主屏幕是ROG PG42UQ 4K138HZ 用的HDMI2.1两块副屏是HKC MG27U 4K160 用的DP1.4
显卡是4090火神 4个接口 HDMIX1 DPX3
天塌了怎么设置都不行
这个我到可以，不过另一个显示器是电视，我都是关闭连接的，用电视的时候再从3个调整1个
When a display is connected to the GPU and is set to DSC mode, the GPU may use two internal heads to drive the display when the pixel rate needed to drive the display mode exceeds the GPU’s single head limit. This may affect your display topology when using multiple monitors. For example if two displays with support for DSC are connected to a single GeForce GPU, all 4 internal heads will be utilized and you will not be able to use a third monitor with the GPU at the same time.
Reply to [pid=791175174,42224859,1]Reply[/pid] Post by [uid=65680210]hgcsew[/uid] (2024-10-26 22:59)太专业了！！！十分感谢！！！ROG的显示器可以关闭DSC，现已关闭！联系HKC显示器工程师询问两个副屏DSC功能情况，告知屏幕自带DSC功能无法关闭，告知更换两跟DP1.2线材尝试一下，现已下单DP1.2线材两根，最后的希望了！！！等到货测试！！！未完待续...
dp1.2线跑不了1.4么？不一定吧
我好奇如果用dp转hdmi，非主动式是否支持dsc
[img]https://img.nga.178.com/attachments/mon_202410/27/9aQ19t-62pbKwT1kShs-cv.jpg[/img]
[quote][pid=791195890,42224859,1]Reply[/pid] Post by [uid=21800254]TrustMe丶[/uid] (2024-10-27 01:13):
太专业了！！！十分感谢！！！ROG的显示器可以关闭DSC，现已关闭！联系HKC显示器工程师询问两个副屏DSC功能情况，告知屏幕自带DSC功能无法关闭，告知更换两跟DP1.2线材尝试一下，现已下单DP1.2线材两根，最后的希望了！！！等到货测试！！！未完待续...[/quote]你还可以插多块显卡，把其中一个屏接过去……
DP1.4线材更换DP1.2线材还是无法显示出第三块屏幕！！！疯了
[quote][pid=791197055,42224859,1]Reply[/pid] Post by [uid=42186572]楪蘭楓[/uid] (2024-10-27 01:25):
dp1.2线跑不了1.4么？不一定吧
我好奇如果用dp转hdmi，非主动式是否支持dsc[/quote]也支持吧，看了dp1.4转HDMI2.1转接线的评论，能4K144Hz
dp线连接副屏开4K120Hz8bit看看会不会开启DSC